架空线路科技毕业论文.docVIP

10KV高压配电所二次回路的设计 摘 要：本文是东方电机厂10KV高压配电所二次回路设计。设计的目的是通过对该电力系统的地理环境、供电条件、供电方式和公用系统等用电负荷资料的分析，为该车间寻找更加完善的供电设计方案。电能是工厂运作的主要能源，对工厂的正常运作有举足轻重的作用，因此如何进行合理用电、安全用电、节约用电、高质量用电已经成为工厂建设和运行的主要问题之一。工厂的安全正常运作、节电节能、提高工厂用电效率，都必须有一个安全、可靠、经济、合理的供电系统和使用电能的系统保障，才能实现工厂电能利用、和节省电能的理想化、经济化。 本配电所的初步设计包括了：运用需要系数法进行负荷计算，短路计算，测量和控制回路的设计，信号回路的设计及继电保护等。 关键词：负荷计算 短路电流计算 电气设备选择 信号回路 继电保护 The Design of Secondary Circuit of 10 KV distribution Abstract: This is the secondary circuit design of 10 KV high-voltage power distribution of the Dongfang Electrical Machinery Factory.The purpose of the design is through the analysis of the g- eographical environment of the electricity system,surply conditions,power surpply and utility syst- ems such as electricity load data, the shop looking for a more complete power supply design. Elec- tricity operation of the plants energy, a pivotal role in the normal operation of the plant, so how the rational use of electricity, safe use of electricity, aving electricity, high-quality electricity has become one of the main problems of plant construction and operation. Normal operation of plant safety, saving energy, to improve plant energy efficiency, there must be a safe, reliable, economic- al and reasonable power supply system and use electric power system protection, in order to achi- eve the factory of electric power, and save energy idealized economic oriented. This distribution the preliminary design including: the need to factor method for load calculations, short circuit calculation, measurement, and control circuit design, signal circuit design and protection. Key words: Load calculation Short circuit current calculation Electric Equipment Selection Signal circuit Protection of electrical equipment 引言随着经济的发展，10/0.4V变配电系统也进入高速发展的时期。变配电技术以及新型的设备层出不穷。因此，变配电的设计及设备的使用都有了质的提升，近年来变配电开关设备也广泛的运用到各种场合，如工厂、医院、政府、居民区、广场等众多场合。变配电开关设备具有经济、便捷、安全、环境要求低等优点。在本次的设计中利用最新的变配电开关设备。实现安装要求限制少，操作方便的特点。工厂10kV配电所是电力系统的重要组成部分，他从电力系统取得电能，通过其变换、分配、输送与保护等功能，然后将电能安全的、可靠