湍流流动的拓扑优化外文文献.pdfVIP

Available online at ScienceDirect Comput. Methods Appl. Mech. Engrg. 331 (2018) 363–393 /locate/cma Topology optimization of turbulent flows , , Cetin B. Dilgen∗ 1, Sumer B. Dilgen1 2 , David R. Fuhrman, Ole Sigmund, Boyan S. Lazarov3 Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, Building 404, DK-2800, Denmark Received 20 June 2017; received in revised form 25 October 2017; accepted 21 November 2017 Available online 5 December 2017 Highlights • Presents a fast approach for topology optimization of turbulent flow systems. • Demonstrates inclusion of turbulence models with minimal implementation effort. • Demonstrates a scalable and computationally cheap procedure for gradient analysis. • Demonstrates the shortcomings of frozen turbulence assumption. Abstract The aim of this work is to present a fast and viable approach for taking into account turbulence in topology optimization of complex fluid flow systems, without resorting to any simplifying assumptions in the derivation of discrete adjoints. Topology optimization is an iterative gradient-based design process which minimizes an objective and satisfies a set of selected design constraints by distributing material in a design domain. The gradients are obtained using adjoint sensitivity analysis which requires solutions of a forward state problem and an additional adjoint problem. In the presented artic