大型电池组的热故障检测方法外文文献.pdfVIP

Measurement 114 (2018) 484–491 Contents lists available at ScienceDirect Measurement journal homepage: /locate/measurement Thermal Fault-Detection method and analysis of peripheral systems for large T battery packs Hannes Nordmanna,c,⁎, Maximilian Frischa,c, Dirk Uwe Sauera,b,c a Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Germany b Institute for Power Generation and Storage Systems (PGS), E.ON ERC, RWTH Aachen University, Germany c Jülich Aachen Research Alliance, JARA-Energy, Germany A R T I C L E I N F O A B S T R A C T Keywords: Complex electrical systems such as battery packs are pushed further to comply with the continuously rising Temperature based faults demands for power, energy and safety. This triangle of requirements needs to be optimized in all three direc- Hotspot localization tions, but has to be well balanced using as much information about the battery’s parameters, such as tem- Value-added battery management functions perature. Today’s battery packs lack of gapless temperature acquisition due to a limited sensor count. To increase Peripheral detection of faults the temperature information count and herewith the safety, additional sensors would need to be installed, which is rather expensive. A different approach is provi