离心力对摩擦磨损的影响外文文献.pdfVIP

Tribology International 116 (2017) 256–263 Contents lists available at ScienceDirect Tribology International journal homepage: /locate/triboint The influence of centrifugal forces on friction and wear in rotational sliding Philipp G. Grützmacher a, *, Andreas Rosenkranz b, Sebastian Rammacher a, Carsten Gachot c, Frank Mücklich a a Department of Functional Materials, Saarland University, 66123, Saarbrücken, Germany b Department of Mechanical and Aerospace Engineering, Center for Magnetic Memory and Recording, University of California, 92093, La Jolla, United States c Institute for Engineering Design and Technical Logistics, Tribology Division, Vienna University of Technology, 1060, Vienna, Austria A R T I C L E I N F O A B S T R A C T Keywords: To investigate the influence of centrifugal forces on the oil film stability and the lubrication regime, mirror Lubrication regimes polished steel surfaces (AISI 304) were tested using a ball-on-disc tribometer in rotational sliding mode with a Centrifugal force steel counter body (AISI 52100). Different sliding radii (1.5 and 6 mm) were used to vary the angular velocity. Coefficient of friction The tests were conducted under fully-flooded conditions using Poly-alpha-olefin oils. The measured coefficients of Solid-solid contact ratio friction were complemented by the measurement of solid-solid contact ratios and the analysis of the respective