采矿工程鸡西矿业集团城子河煤矿0.6Mta新井设计参考.docVIP

摘 要 本设计矿井为鸡西矿业集团城子河煤矿0.6Mt/a新矿井设计，共有4层可采煤层，分别为7#、8#、23#、29# 煤层总厚度为5.5。全区走向长5900，宽2150,面积为13.60。煤层工业牌号为1/3焦煤，设计井田的可采储量63.5Mt，设计服务年限为61。 本矿井设计采用双立井开拓，划分为三个水平，六个采区。东部基本采用双翼开采，西部多为单翼开采，一个工作面达产，达产时采区个数为一个。最上层采用独立上山布置，其余三层集中布置。大巷运输采用14架线式电机车牵引，3底卸式矿车运输，采用的采煤方法为走向长壁采煤法，采煤工艺为综合机械化采煤工艺。顶板处理方法为全部跨落法。 关键词：矿井设计 立井开拓 走向长壁采煤法 全套图纸，加 Abstract This design mine is CHENGZIHE coal mine of the JIXI mineral industry 0.6 Mts/a of the group new mine design, this mineral area totally has 4 F and can adopt coal seam and distinguish to 7#, 8#, 23#, 29# thicknesses with total coal seams to 5.5 meters.The whole area alignment grows 5900 meters, the breadth is 2150 meters, area is 13.60 the squares be thousand meters.The coal seam industrial card number is 1/3 coals, design well farmland of can adopt to keep to measure 63.5 megatons, design length of service is 61 years. This mineral well design adoption double signs well to expand, divide the line to three levels and 6 adopt area.The eastern basic adoption double wing mine and the west much mines for the single wing and a work noodles can immediately reach to produce and adopt the area piece as 1 while reaching to produce.The topmost layer is apart from an other layer, the farther adoption independently climbs mountain a decoration, and the rest 3 F is apart from a nearer doption concentration a decoration.The big lane conveyance adopts 14 line type electrical engineering cars to lead, 3 the ton bottom unload type mineral car conveyance, adopt of adopt a coal method to full-mechanized mining, adopt a coal craft for comprehensive the mechanization adopt a coal craft.Crest plank treatment for all across to fall a method. Keyword:mine design, vertical shaft development, longwall coalminnig method,full-mechanized mining 目 录 要 I 绪 论 1 第一章 井田概况及地质特征 2 1.1井田概况 2 1.1.1交通位置 2 1.1.2地形地势 3 1.1.3井田附近工矿农业概况及建设情况 3 1.1.4矿区材料水电的供给情况 3 1.1.5气象和地震情况 3 1.2地质特征 4 1.2.1矿区内的地层情况 4 1.2.2井田范围内和附近的主要地质构造 6 1.2.3煤层赋存状况及可采煤层特征 6 1.2.4岩石性质、厚度特征 6 1.2.5井田内的水文