采矿工程鸡西矿业集团哈达煤矿1.5Mta新井设计参考.docVIP

摘 要 本设计矿井为鸡西矿业集团哈达煤矿1.5Mt/a新井设计。煤层工业牌号为1/3焦煤，可采储量173.46Mt，服务年限为80 a。 井田走向长度6.75km，倾向长度4.25 km，共有四层可采煤层，全区可采，即23#、30#、36#、37#煤层，赋存深度+25m～-800m，总厚度8.1m，平均倾角13.7，顶底板大都为粉沙岩，硬度较高。其中23#煤层与30#煤层间距135m、30#煤层与36#煤层间距40m、36#煤层与37#煤层间距25m，区内有四条断裂都为正断层落差范围在0～250m，将井田划分为四个区域。 设计矿井采用双立井开拓，划分三个水平。本设计为第一水平开拓，采用梭式井底车场，集中大巷采区石门开拓布置，井底车场和集中大巷布置在23#煤层底板中，30#、36#、37#煤层采用联合开采，在37#煤层底板中布置集中上山。大巷采用两辆10t架线电机车牵引3t底卸式矿车运输。 设计采区为中央采区，走向长度2200m，倾斜长度1000m，煤层厚度2.5m倾角13.7。采用三条上山布置在煤层中，双翼采区单翼回采，工作面长度190m，上行式通风后退式回采，走向长壁采煤法，综合机械化回采工艺一次采全高。通风方式为两翼对角式。 关键词 可采储量 集中大巷 采区石门 走向长壁采煤法 Abstract The design of the mine for JiXi Mining Group HaDa mine 1.5 Mt / a new well design. The coal industry brands is 1/3 coke，ecoverable reserves is 173.46 Stand the years of service is 80a. The strike length is 6.75 Kaman the long tendency is 4.25 km of the mine. It have totally of four coal seams, the region could be adopted. The coal seam are23#、30#、36#、37#, depth of occurrence +25 m ~ 800m.The average seam thickness is 8.1m, and the average dip is 13.7. Most of the roof and floor is sand rock, and the sand rock’s hardness is higher ,the 23# and 30# coal seam interval 135 m ,the 30# and 36# seam interval 40m, the 36#and37 # seam interval 25m . There are four faults of the gap in the range of 0~250m, mine will be divided into four regional. Design of two-shaft mine exploration, divided into three levels. The design of exploration is the first level, using bottom-yard shuttle, concentrated in large mining area district cross-cut pioneering layout, bottom concentrated in large parking lots and roadway layout of the 23#seam floor ,30#、36#、37#seam mining in a joint concentrated uphill laid in 37# seam floor. Two 10t transport planes motor traction 3t bottom tub transports in roadway. Design district of the central district, to the length of 2200 m, 1000 m length tilt, the seam thickness is 2.5 m and the average dip is 13.7o, using three seam deployed in the mountains, wings mining area single-wing exploitation, Face le