cvc-6h毕设.doc

摘　　要 冷轧的板形控制问题是冷轧生产中的关键问题。CVC-6h 和UCM平整机是新建宽带钢冷轧机的推荐机型，应用越来越广泛。本文针对某1730冷连轧机组CVC-6h和UCM平整机，深入研究了其板形控制性能，并进行对比。 针对上述目标，本文完成了如下工作： 采用有限元软件ANSYS，建立了可参数化修改的六辊CVC辊系静力学模型，仿真实验结果表明此模型能够准确的反映各扰动因素及控制手段对辊缝形状的影响利用所建立的辊系模型，分别对工作辊弯辊、中间辊弯辊及中间辊横移各控制手段对辊缝的影响，进行了大量的理论计算及数据分析，定地揭示了辊缝凸度、辊间压力、辊系横向刚度的变化规律，全面分析评估了各轧制参数对板形的影响，为工艺参数的修正和寻找改善板形的途径提供了可靠的理论依据。六辊CVC冷轧带钢板形控制CVC-6h和 UCM平整机；有限元Study on shape control performance of CVC-6h temper rolling mill for high strength steel Abstract Shape control of old rolled steel ships is complicated and hard to be solved during temper rolling. CVC-6 and UCM temper rolling mill is the representative new-kind high technology temper roll, with excellent ability of shape control, then be used widely in the iron and steel enterprise everywhere in the world. But in the area of independently developed, there is hardly any large scale temper rolling wide strip with proprietary intellectual property rights. One reason for that situation was the foreign metallurgical equipment, which have there own advanced technology, and the plenty of experience, another was the neglect of the research and development of the core technology .Thus in temper rolling equipment design, and there are great differences with the foreign corps. At present, CVC-6h temper rolling mill is widely used in cold strip rolling. Aimed at1730mm tandem temper rolling mill, flatness control behavior of CVC-6h and UCM temper rolling mill is studied in this paper. Profile and flatness control behavior with rolling conditions and the stability of control characteristics also have been analysis. Several achievements have been obtained as follows. One parametric static model of roll cluster of six-high CVC-6h and UCM temper rolling mill was established based on ANSYS. The influence rules of disturbing factors and related control measurements on the shape of roll gap are acquired from the results of simulation, and they agree well with real pr adduction field conditions. The large amounts of theoretic