Epigen材料介绍.pptVIP

A high performance, solventless, epoxy polymer lining designed to meet the highest standards of elevated temperature service, chemical resistance, and corrosion protection. 是一种高性能非溶剂环氧聚合物，旨在满足不断升高的温度运行条件、防化学和防腐蚀的最高标准。 XD005 is primarily a barrier coating or lining suited to treatment of steel, concrete and brick in applications where temperatures may exceed 150 Celsius or the substrate requires protection from hot chemicals. 运行温度可超过150度，为基体提供热化学防护。XD005主要是一种防腐涂料衬里材料，适用于钢结构、混凝土和砖的防腐处理。 Extremely high cross linking density affords XD005 the ability to resist a range of organic solvents including ketones and chlorinated aromatics . Also highly favoured where the lining is required to address hot highly corrosive acids. XD005衬里具有极高的纵横交错结构，不含绝大部分的有机溶剂，包括酮和氯化芳烃，同时衬里具有优良的耐热耐酸性能。 HEAT RESISTANT HB LINING epigen XD005 TYPICAL APPLICATIONS 主要应用 Pumps Impellors Ducting Systems 泵和叶轮 烟道系统 Exhaust Stacks Tanks Vessels 烟囱 箱罐 Rail Cars Scrubbers 轨道车 洗涤器 Laundries Steelwork Coating 洗衣房 钢结构涂层 Pipelines Valves Solvent Extraction 管道和阀门 溶剂萃取器。 FEATURES 特征 Highly erosion resistant polymer system Application DFT up to 1000 micron in the one coat Free of all solvents - zero VOC Engineered for high mechanical strength Resistant to organic solvents Versatility in application - can be used with GF HDT 150 Celsius - Practical service beyond 200 Celsius Outstanding resistance to chemicals acids. 防腐施工时单层厚度可高达1mm。不含任何挥发性的溶剂，VOC为0，能抵抗多种有机溶剂，有很高的机械强度。热变形温度为150度，实际应用中运行温度可超过200度，可抵抗强烈的化学腐蚀和酸腐蚀。 PROFILE 材料使用规定 Ratio by weight 5 parts “A” to 1 part “B” 按重量混合比例：5份A，1份B Pot Life minutes @ 24oC 60 在24度时固化时间：60分钟 Mixed consistency @ 24oC Flowable Liquid 混合后的粘稠度：易流动的液体 Specific gravity when mixed 1.5 混合后的比重：1.5 Kg/m2 for 500 micron 0.9 500微米 用量：0.9公斤 Tack free time @ 24oC 180 minutes 24度时不沾手时间：180分钟 TYPICAL CURED PR