验证例题15.pdfVIP

Example 15 Title Closed section beam under a torsional moment Description Find the shear stresses and the angle of twist for a square box cantilever beam subjected to a torsional moment at the free end. Structural geometry and analysis model 1 Model Analysis Type 3-D static analysis Unit System in, lbf Dimension Length 1500 in Width 150 in Depth 150 in Element Plane stress element Material Modulus of elasticity E = 7.5 psi Poisson’s ratio ν = 0.3 Element Property Size a × b = 375 in × 75 in Thickness t = 3 in Boundary Condition Nodes 33~40 ; Constrain all DOFs. Load Case Torsional moment is applied to the free end, expressed in terms of equivalent couples. Torsional moment = 300.0 lbf-in Equivalent loads, P1 = 0.25 lbf and P2 = 0.5 lbf (Refer to the figure shown above) 2 Example 60 Results Stresses Displacements 3 Comparison of Results Theoretical calculation T Shear stress (τxy) = 2 = 0.002222 psi 2a t TL Angle of twist (φ) = = 0.0154074 rad 3 ta G Where, T : Torsional moment (300 lbf-in) L : Length of th