唐山学院办公楼建筑结构设计-土木工程毕业论文.doc

xxx 学 院 毕 业 设 计 设计题目：唐山学院办公楼建筑结构设计 系 别： 土木工程系 班 级： 08土木工程（）5年6月13 日唐山学院办公楼建筑结构设计 摘 要 本工程为唐山市办公楼该办公楼总建筑面积m2，层，建筑为m。该建筑现浇钢筋混凝土框架结构。 The Architectural and Structural Design of Office Building Of Tangshan College This project is the office building of Tangshan College of Tangshan City. The office with the total area of 6235.52, is composed of six layers, building a total height of 23.2m. The building is cast-in-place reinforced concrete frame structure with aseismatic grade two. The design is divided into two parts of architecture and structure. According to the design task book requirements, considering the natural conditions, the use of function and architectural modeling and other factors, and space layout, architectural design met the use, safety, economic requirements. Structural design includes structural layout, section, primary structure internal force calculation, internal force combination, seismic design adjustment, cross section reinforcement calculation, drawing construction drawing. The reinforced concrete frame structure was calculated considering horizontal action (wind load, earthquake) and vertical action (dead load, live load, gravity load charecter value) under the combination of internal force, to find the most unfavorable combination of cross section reinforcement calculation. In addition. Stair using actual loading reinforcement was calculated. Based on non seismic internal force combination reinforcement foundation was design. Beam and column calculation results is the basement of construction drawing of a frame reinforcement. Keywords: Office building; reinforced concrete frame structure; load statistics; Internal force calculation; reinforcement calculation 目 录 1 引言 1 2 工程概况 2 2.1工程名称 2 2.2建设地点 2 2.3设计资料 2 2.4气象条件 2 2.5地震烈度 2 2.6工程地质条件 2 3 设计依据 3 4 结构布置 4 4.1结构布置 4 4.2框架结构承重方案的选择 5 5 截面初估 6 5.1框架梁截面尺寸 6 5.2框架柱截面尺寸 7 5.3板截面尺寸 8 6 框架梁、柱线刚度的计算 9 6.1梁的计算跨度 9 6.2柱的高度 9 6.3框架梁线刚度计算 9