[其它语言学习]NFPA16-2007StandardfortheInstallationofFoam-WaterSprinklerandFoam-WaterSpraySystems.pdf

NFPA 16 Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems 2007 Edition Copyright © 2007 National Fire Protection Association. All Rights Reserved. This edition of NFPA 16, Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, was prepared by the Technical Committee on Foam-Water Sprinklers and released by the Technical Correlating Committee on Automatic Sprinkler Systems. It was issued by the Standards Council on December 1, 2006, with an effective date of December 20, 2006, and supersedes all previous editions. This edition of NFPA 16 was approved as an American National Standard on December 20, 2006. Origin and Development of NFPA 16 The first standard involving foam-water sprinkler systems was published in 1954 by the National Board of Fire Underwriters (now American Insurance Association) and was titled Standard for Combined Foam- and Water-Spray Systems. The NFPA Technical Committee on Foam-Water Sprinklers was established in 1959 with assistance from the NBFU. The first edition of this standard was published in 1962. Various updates to the standard were completed in 1968, 1974, 1988, and 1990. Changes were made to recognize the use of new foam concentrates and to improve the language and format of the document. The 1995 edition included clarification of the scope of the standard, improvements to the hydraulic design criteria, and recognition of a fourth proportioning method. The 1999 edition combined NFPA 16 and NFPA 16A into one comprehensive document. Numerous editorial changes also were instituted. The 2003 edition was reformatted to conform to the Manual of Style for NFP