充气薄膜管的弯皱行为分析-工程力学.pdfVIP

第 26 卷第 2 期 Vol.26 No.2 工 程 力 学 2009 年 2 月 Feb. 2009 ENGINEERING MECHANICS 210 文章编号：1000-4750(2009)02-0210-06 充气薄膜管的弯皱行为分析 * 1, 2 2 2 王长国 ，杜星文 ，赫晓东 (1. 哈尔滨工业大学材料科学与工程博士后流动站，哈尔滨 150001 ；2. 哈尔滨工业大学复合材料与结构研究所，哈尔滨 150080) 摘 要：基于 Stein-Hedgepeth 褶皱理论，并通过引入“收缩系数”表征了膜结构褶皱形变特性，联合褶皱时的应 力平衡条件完成了充气膜结构褶皱分析。将方法拓展应用于充气薄膜管情况，分析了充气管结构的弯皱变形特性， 得到了临界皱曲弯矩和失效弯矩，并分析了弯矩随管半径和气压的变化规律。通过弯皱试验与分析结果进行比较， 验证了分析结果的准确性。 关键词：充气结构；薄膜；充气管；褶皱；收缩系数 中图分类号：TB383; TU353 文献标识码：A BENDING-WRINKLING BEHAVIOR ANALYSIS FOR INFLATABLE MEMBRANE BOOM * 1, 2 2 2 WANG Chang-guo , DU Xing-wen , HE Xiao-dong (1. Post-doctoral Research Center in Material Science and Engineering, Harbin Institute of Technology, Harbin 150001, China; 2. Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China) Abstract: Based on Stein-Hedgepeth wrinkling theory, wrinkling characteristics were analyzed by introducing a concept of contraction factor. The wrinkling behavior analysis was performed by incorporating the wrinkling stress equilibrium equations and the wrinkling criterions. The analytical method was extended to the three-dimensional inflatable membrane boom to obtain the bending-wrinkling characteristics. The critical wrinkling moment and failure moment were then obtained based on the assumptions in membrane theory. The influence of the radius and inflated pressure on the moment of inflatable boom was evaluated in the end. A bending-wrin