- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
机组通电前检查.PDF
PRL-5B-2 Operation instructions on Production line Electric operation
_____________________________________________________________________
Inspect the set before power connection
★ Connect the wires and cables that require on-site connection.
★ All connectors are well connected.
★ All the limit switches have been installed and the positions will not make the moving parts
under its control exceed the range.
★ The following items of the distribution box and the corresponding electric components should
be confirmed:
☆ All the connections of wires and cables are tightly fixed and there is no come-off.
☆ There is no short circuit between phases
☆ The ground insulation resistance of phases should meet the requirement.
☆ There is no cross-link between the voltages of different levels.
☆ All the components are reliably grounded.
☆ The set value of the thermal relay should be correct and in the work state.
After that, turn on the power: The connection should be conducted according to the sequence of up
level first and then lower level. Turn on one and confirm that there is nothing abnormal and then
the next, till all are in connection.
Read and set the parameters of frequency converter
☆ The method for reading out and setting the parameters of frequency converter:
After being connected, it displays the initial picture. ①Press PRGM/RESET key to enter the
programming state; ②Display the first parameter name PR.-00; ③Press ▼and ▲ to find
the name of the parameter you want to inspect and set; ④Press FUNC/DATA key and
display the current value of the parameter; ⑤You can change the value by pressing ▲and ▼;
⑥Press FUNC/DATA key and display -END- and in 2 seconds, it will automatically return
to step②; the value of the parameter is changed; ⑦ Press PRGM/RESET key to return to
文档评论(0)