换热英文参考哦.pdfVIP

ELSEVIER Development and Verification of General Correlations for Pressure Drop and Heat Transfer in Single-Phase Turbulent Flow in Enhanced Tubes T. S. Ravigururajan • General correlations are developed and verified for friction factor and Department of Mechanical Engineering heat-transfer coefficient for single-phase turbulent flow in internally aug- Wichita State University mented tubes. Data from frequently referred investigations were gathered Wichita, Kansas 67260 USA for a wide range of tube parameters with e/d, 0.01 to 0.2; p/d, 0.1 to 7.0; A. E. Bergles a/90, 0.3 to 1.0, and flow parameters Re, 5000 to 250,000 and Pr, 0.66 to Department of Mechanical Engineering 37.6. The data were applied to a linear model to obtain normalized Aeronautical Engineering and Mechanics correlations that were then modified to approach smooth tube correlation Renssalaer Polytechnic Institute as the roughness variables became very small. A shape function was Troy, New York 12180, USA included in the friction correlation to account for different rib profiles. These correlations were then verified by independent experiments. Differ- ent types of commercial fibbed tubes were tested with water as working