GM_APQP_通_用_汽_车全_球APQP产_品_质_量_先_期_策_划.pptVIP

Read Slide and explain that today is the Kick-Off meeting or Pre-Production meeting where all deliverables required for Supplier Program Review #1 will be reviewed The supplier should have received a letter from you prior to the Kick-Off meeting explaining what is required at this Kick-Off meeting STRESS that the main objective of today’s meeting is to make sure that the supplier understands all the requirements in GM’s common APQP process Make sure they understand how the updates to the requirements will be done The 4 Supplier Program Reviews are the minimum formal reviews that will take place Additional program meetings will most likely occur these could be engineering work teams or internal supplier team meetings Read Slide As this first Supplier Program Review continues each of the documents listed here will reviewed 13 11 Read Slide This review follows the same logic that program review 2 followed Basically, more detail will be required on any item that was reviewed at PR#2 Read Slide You may want to have the APQP Project Plan GM 1927-1 handy to put on the screen again and identify items with a 3 Read Slide Detail is spelled out on the slide Read Slide Understand that GP-11 or Pre-Prototype and Prototype requirements are NOT the responsibility of the SQE, BUT we need to be involved in making sure the engineer is clearly communicating what is required for these builds The requirements include what dimensional checks will be needed to be completed by the supplier, will parts need to be serialized? These requirements are the GM engineers responsibility Read Slide Level of detail explained on slide Read Slide Clearly explain supplier that this is a GM INTERNAL document and IS NOT SHARED IN DETAIL WITH THE SUPPLEIR WHEN IT IS COMPLETED NEVER PROVIDE A COPY TO THE SUPPLEIR OF A COMPLETED FORM Read Slide Items due for review are all the PPAP required documents Read Slide Read Slide Slide explains the requirements Read Slide The PFMEA Strategy is n