毕业设计（论文）-粉状物质回转式筛选机结构设计_精品.docVIP

粉状物质回转式筛选机结构设计 机械设计制造及其自动化专业 学生：*** 指导教师：*** 【摘 要】粉状物质回转式筛选机的结构设计，分析物料在筛选机筛面上运动,以生产率最高为优化目标,建立了滚动筛选机参数。 目前,在国内各类筛选机普遍存在生产率和筛选效率低的问题,已经严重的影响了企业的生产加工。要解决这一问题的方法有两种:等厚筛选等筛选技术、采用概率筛选、和调查分析粉状物质的相关物理和化学性质（例如物质的组成、粒度分布、粘度、操作系统的压力和问题等等），以确定解决方案。经过对粉状物质的生产工艺特点进行分析，并综合的考虑生产工艺和技术要求及安全预防等一些因素，设计滚动式筛选机。 根据运动学、动力学和筛分原理实现筛选机的筛分功能，对滚动式筛选机的各个机构进行了运动学和动力学的详细分析计算，确定齿轮、电机、联轴器和链轮等的具体参数。 滚动式筛选机一般由下箱体、滚筒、箱体、传动系统、电机等机构构成。 【关键词】 粉状物质 回转式 筛选机 结构设计 The powdery material rolling screening machine structure design Major: Mechanical Engineering and automation Undergraduate: *** Tutor: *** 【Abstract】 The powdery material rolling screening machine structure design, through the analysis of the material in the sieve screening machine relative motion surface, and the highest productivity as the optimization objective, a rolling screening machine parameter optimization. At present, the domestic various screening machine generally exists in the productivity and the screening efficiency is low, has seriously affected the enterprises production. There are two ways to solve this problem: the use of screening new probabilistic selection and thickness selection and new screening machine. Investigation of the powdered material related physical and chemical properties (such as material composition, size distribution, viscosity, pressure and problems of the operating system, etc.), to determine the solution. Through the production process of powdered material characteristics is analyzed, and comprehensive consideration of production technology and technical requirements and safety prevention and some other factors, to design roller screening machine. According to the principle of kinematics, dynamics and screening of sieving machine screening function, the rolling of the sieving machine various agencies has carried on the detailed analysis and calculation of kinematics and dynamics, determine the gear, motor, coupling and sprocket, etc. The specific parameters. Rolling sieving machine generally consists