电气工程及其自动化专业【毕业设计 文献综述 开题报告】无机械触点的继电器设计（可编辑）.docVIP

电气工程及其自动化专业【毕业设计+文献综述+开题报告】无机械触点的继电器设计 No Mechanical Contact Relay Design Abstract Relay is a control device with control system also known as the input circuit and the controlled system also known as the output circuit ,often used in automatic control circuit, as with the small current to control a larger current automatic switch，plays an automatic adjustment , safety protection, conversion circuitry and so on in the circuit.Generally traditional electromagnetic relay is composed of core, coil, armature and reed contacts.Through the normally open, normally closed contact of the pull and release,so as to achieve the purpose turning on and cutting off in the circuit.Therefore not conducive to explosion-proof, easy to damage due to spark. The design intends to build a relay that based on a controlled power electronics technology device, have no mechanical contacts, and can achieve real-time communication with the computer .The design of the input should be included the sensor body to reflect a certain part of the input variables such as current, voltage, temperature, light, etc. ;must have the the implementing agencies output part to accused pass and off of the charged circuit.Between the input part and output part in the relay,also have the body parts drive part coupling isolation, processing of the input and driver the output part.At the same time through MCU control, to achieve automatic, remote control and monitoring. Keywords：Relays, contacts, SCM 目录 摘 要 III Abstract IV 1 绪论 1 1.1无机械触点继电器的来源 1 1.2无机械触点继电器的意义 1 1.3无机械触点继电器的国内外发展现状 2 1.4无机械触点继电器研究的主要内容 2 2无机械触点继电器的方案设计与总体设计 3 2.1 无机械触点继电器的方案设计 3 2.1 无机械触点继电器的总体设计 4 [1]设计的技术线路 4 [2]各部分功能简介 4 3主电路的设计 5 3.1主触点中IGBT的选型 5 3.2主触点中IGBT的驱动 7 [1]M 57962AL 主要特点 [2]驱动模块M57962AL引脚功能、用法 8 [3]M57962AL的内部结构和工作原理 9 [4]M57962AL典型应用电路以及波形 11 [5]功能分析 13 3.3主触点中三个IGBT的接法 14 3.4 IGBT导通和关断状态分析 15 4 控制电路的设计 16 4.1辅助触点中MOSFET的选型 16 4.2辅助触点中MOSF