冷加工和冷挤压的钢棒棍和线一般交货技术条件冷处理后不用于热处理的钢.pdf

BRITISH STANDARD BS EN 10263-2:2001 Incorporating Corrigendum No. 1 Steel rod, bars and wire for cold heading and cold extrusion — Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working The European Standard EN 10263-2:2001 has the status of a British Standard ICS 77.140.60; 77.140.65 ÒÑ ÝÑÐÇ×ÒÙ É×ÌØÑËÌ ÞÍ× ÐÛÎÓ×ÍÍ×ÑÒ ÛÈÝÛÐÌ ßÍ ÐÛÎÓ×ÌÌÛÜ ÞÇ ÝÑÐÇÎ×ÙØÌ ÔßÉ BS EN 10263-2:2001 National foreword This British Standard is the official English language version of EN 10263-2:2001. Together with BS EN 10263-1:2001, BS EN 10263-3:2001 and BS EN 10263-4:2001 it supersedes BS 3111-1:1987, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/71, Steel rods for wire drawing, which has the responsibility to: — aid enquirers to understand the text; — present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; — monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references