q-fog循环腐蚀盐雾箱测试标准-老化试验箱.pdfVIP

Q-FOG Q-FOG QQ--FFOOGG循环腐蚀盐雾箱测试标准 ASTM B117 Standard Practice for Operating Salt Spray (Fog)Apparatus This practice provides a controlled corrosive environment which has been utilized to produce relative corrosion resistance information for specimens of metals and coated metals exposed in a given test chamber. ASTM B117 盐雾试验箱操作的标准测试方法 本测试方法提供了一个受控的腐蚀性环境，用于在给定的测试箱中产生金属和涂层金属样 品的相关耐腐蚀性信息。 ASTM B368 Standard Test Method for Copper-AcceleratedAceticAcid-Salt Spray (Fog) Testing(CASS Test) This test method prescribes the conditions required in copper-accelerated acetic acid-salt spray (CASS) testingfor specification purposes. ASTM B368 铜加速乙酸盐雾试验（CASS 试验）的标准测试方法 该测试方法规定了铜加速乙酸盐雾试验（CASS 试验）测试规范所要求的条件。 ASTM D1654 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings onAluminum Extrustions and Panels This specification describes test procedures and performance requirements for high performance organic coatings applied toaluminum extrusions andpanels for architectural products. ASTM D1654 铝合金型材和板材上的高性能有机涂料的推荐规格、性能要求和测试程序 本规范描述了高性能有机涂料的测试程序和性能要求，这类涂料适用于建筑产品（铝合金 型材和板材）。 ASTM D1735 Standard Practice for TestingWater Resistance of Coatings Using Water FogApparatus This practice covers the basic principles and operating procedures for testing water resistance of coatings inan apparatus similar to that used for salt spray testing. ASTM D1735 使用水喷淋装置测试涂层耐水性的标准测试方法 本测试方法规定了在类似于用于盐雾测试的仪器中测试涂层耐水性的基本原则和操作程序。 ASTM D2247 Standard Practice for TestingWater Resistance of Coatings in100% Relative Humidity This practice covers the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100% relative humidity so that condensationforms on the test specimens. ASTM D2247 100％相对湿度下涂料防水性能测试的标准方法标准 本测试方法规定了涂层耐水性测试的基本原则和操作程序，用于曝露测试的涂层样品处于 相对湿度100%的环境中，这样测试样品上就会形成冷凝。 ASTM D2803 Standard Guide for TestingFilifor