上海工程技术大学研究生英语课堂.pptxVIP

Reconstruction technology on the surface and Reverse EngineeringNAME:CHEN YONGNUMBER:M010116104一、项目基本情况To reverse a target product research and analysis, to deduce and draw the product processing process, organization structure, features and technical specifications and other design elements, and produce similar functionality, but not exactly the same product.Using the powerful function of point cloud data processing in imageware , it achieves point cloud data pre-processing, point cloud segmenting, contour curve fitting and surface reconstructing of entity. Finally, it makes the error evaluation of the surface model. This study may provide original design basis for related research.?To get the dataData pre-processingThe division data and surface reconstructionCAD model reconstructionThe main steps of the reverse engineering modelingThe research trend of rebuild features In order to ensure smooth, the scholar of the cross section data refactoring method carried out extensive research . The commonly used method with energy method, the wavelet method and least square method, including energy method is one of the widely used methods. The basic principle of energy method is: under the given constraint conditions (such as after adjustment curve of the maximum offset is less than the given value), adjust the curve control points, the curve of minimum strain energy . The key Smooth the energy method : the determination of energy function; Solution of the optimization problem.Different fairing (continuous) degree of schematic diagram.2.1 To Get The DataPoint cloud data acquisition is generally done by three coordinate measuring machinethree coordinate measuring machine2.2 Data Pre-processingThe working drawing of imagewareWith present commonly used reverse engineering software (such as Imageware), to repair the point cloud pretreatment, denoising and streamlined.2.3 The division data and surface reconstructionFirst, according to the shape of the point cloud condition, choos