几种品牌静脉输液港植入输液针后磁共振扫描安全性-中国医疗设备.PDF

MEDICAL ENGINEERING TECHNOLOGY 医学工程技术 几种品牌静脉输液港植入输液针后 磁共振扫描安全性相关研究 王传兵，刘波，李大鹏 南京医科大学第一附属医院放射科，江苏南京 210029 [摘 要] 目的 探讨静脉输液港植入输液针后在磁共振检查中的安全性。方法 将两个公司生产的不同型号的静脉输液港和输 液针放在磁共振中进行偏移力测量，记录测量结果；应用磁共振发热极端序列扫描，分别测量不同输液针与4种输液港组合 的温度升高情况；对带输液针的静脉输液港植入后患者进行安全性观察。结果 不同厂家不同型号的输液港港体和输液针在 入口处偏移角度0°～55°，在机器中均不发生偏转；所有输液针与输液港组合与单独输液港温度差在0.5℃～1.2℃之间，最 大差值1.8℃；所有20例带输液针的静脉输液港植入患者体内后，在3.0 T MR入口及机器中均未见输液针和输液港移位，港 体未见有损坏、渗液、贴膜松动等现象，患者无不适症状。结论 静脉输液港植入输液针后，在3.0 T MR检查中是安全的。 [关键词] 磁共振成像；静脉输液港；磁共振安全性；磁共振热效应；输液针 Study on the Safety of Magnetic Resonance Imaging After the Operation of Venous Access Port WANG Chuanbing, LIU Bo, LI Dapeng Department of Radiology, The First Hospital Affiliated to Nanjing Medical University, Nanjing Jiangsu 210029, China Abstract: Objective To explore the safety of the vertical needle in the magnetic resonance (MR) examination after the implantation of the intravenous infusion port. Methods Different types of venous infusion and infusion needles produced by the two companies were measured in the magnetic resonance, and the measurement results were recorded. The temperature rise of different infusion needles and 4 types of infusion port combination were measured by using magnetic resonance heating extreme sequence scanning respectively. Safety observation was performed on the patients after intravenous infusion port with infusion needle. Results Different types of infusion port and infusion needle of different manufacturers were offset from the angle of 0°-55°at the entrance, and no deflection occurred in the machine. All the infusion needle and infusion port combination and individual infusion port temperature difference between 0.5℃-1.2℃, the maximum difference was 1.8℃. None of the 20 patients with intravenous infusion of intravenous fluids were infusion needle