Job Hazard Analysis Manual文档.docVIP

Job Hazard/Safety Analysis Manual Hazard Analysis: Cutoff Saw (Carpenter Maintenance Shop, HVAC) Task Hazard Cause Prevention General Use Inhalation Dust/particles generated during machine operation Appropriate natural ventilation, disposable respirators, automatic vacuum machine Eye Injury Projectiles Safety glasses with side shield or appropriate safety goggles Trauma Projectiles, rotating parts, point of operation, ingoing nip joints, flying chips sparks Situational awareness, PPE, protective clothing, machine guards Foot Injury Drop object on foot Safety shoes Hand Injury Point of Operation, ingoing nip points, rotating parts, flying chips and sparks Machine guards, situational awareness Head Protection Projectiles Face Shield Fire Heat, sparks Appropriate placed fire extinguisher, remove all combustibles and fire hazards from area Electrical Shock Improper grounding, improper operations and maintenance Lockout/tagout, proper grounding of frame, manufacturer’s instructions strictly followed PPE Required: Safety Shoes/Boots Safety glasses/goggles Face Shield (optional) disposable Respirators (optional) Hearing Protection Equipment Procedures/Requirements: Operate equipment in strict accordance with manufacturer’s instructions and in accordance with Cal/OSHA Sections 4184 and 4296 ET. Seq. Title 8 CCR. (Fed/OSHA 29 CFR 1910.212 and 1910.213). A mechanical or electrical power control shall be provided to make it possible for the operator to cut off power without leaving his position at the point of operation. All belts, pulleys, gears, shafts shall be guarded in accordance with specific requirements of Cal/OSHA Section 3940 ET. Seq. (Fed/OSHA 29 CFR 1910.219). Machines designed for a fixed location shall be securely anchored to prevent walking or moving. One or more methods of machine guarding shall be provided to protect the operator and other employees in the area from hazards such as those created by point of operation, ingoing nip