35th锅炉中心给粉旋流燃烧器单相流动特性的试验研究 word格式.docxVIP

AbstractWith the development of national economy, the demand for electricity is increasing. In order to meet the needs of electricity,the unit capacity boilers are growing in power plant. However, the following problems exist on the operation: the low combustion efficiency and high levels of pollutant emissions. In this case, it is necessary to develop the high efficiency and low NOx swirl combustion technology, which is suitable for Chinas national conditions and solves the problems existing in the large-scale utility boiler during the pulverized coal combustion process. In this paper, we studies the central-fuel-rich swirl coal combustion burner, which is one of the swirl combustion technologies.In order to carry out boiler burner transformations in a power plant, we study the flow field characteristics of the central-fuel-rich swirl coal combustion burner pilot. Through its single-phase and cold test, we find the optimal structure of pulverized coal combustion in the furnace and use it as the final transformation of the structure. Also, we study the structural parameters and operating parameters on the air flow characteristics of dynamic field of the central-fuel-rich swirl coal combustion burner. Among them, structural parameters include the angle, length and location of the primary air outlet, and the angle and position of the second air outlet, as well as the angle and position of the second air outlet. Moreover, we study the flow field characteristics of the prototype spiral-type swirl burner in the power plant and compare the performance of the two burners. The aerodynamic field results show that the central-fuel-rich swirl coal combustion burner is better than the spiral-type swirl burner.In order to master the ratio of internal and external secondary air volume changed by tangential blade angle, which are not installed the speed devices and in bellows structure, basing on the known optimal structure of it, we get the needed results through the leaves resis