GS 37-2005海湾汽车认证条款.pdfVIP

GS 37 MOTOR VEHICLES METHODS OF TEST FOR IMPACT STRENGTH PART 2: MOVING BARRIER REAR IMPACT GULF STANDARD GS 37/2005 MOTOR VEHICLES METHODS OF TEST FOR IMPACT STRENGTH PART 2: MOVING BARRIER REAR IMPACT 1- SCOPE AND FIELD OF APPLICATION This standard is concerned with the method of test for the rear impact strength of passenger cars multi-purpose passenger vehicles, trucks and buses with GVW less than 4500 kg using the moving barrier. 2- COMPLEMENTARY REFERENCES 2.1 GS 36/2005 “Motor Vehicles - Methods of Test for Impact Strength - Part 1: Frontal Impact”. 2.2 GS 38-A/2005 “Motor Vehicles - Methods of Test for Impact Strength – Part 3A: Side Impact”. 2.3 GS 38-B/2005 “Motor Vehicles - Methods of Test for Impact Strength - Part 3B: Moving Barrier Side Impact”. 2.4 GS 38-C/2005 “Motor Vehicles - Methods of Test for Impact Strength - Part 3C: Moving Barrier Side Impact”. 2.5 GS 39/2005 “Motor Vehicles - Methods of Test for Impact Strength - Part 4: Roof Strength”. 2.6 GS 40/2005 “Motor Vehicles - Impact Strength”. 3- MEASURING INSTRUMENTS 3.1 Speed measuring device: It shall permit measurement of speed to an accuracy of (± 1)% of its reading. 3.2 Time measuring instrument: It shall permit measurement of time to an accuracy of (± 0.001) second. 3.3 Cinematographic camera: Its speed shall be from 200 to 1000 images per second. 3.4 Dimensions measuring instrument: It shall permit measurement of length to an accuracy of (± 5)% of its reading. 4- TEST CONDITIONS (A) The following shall be met: Fuel Spillage Measurement for passenger cars, multipurpose passenger vehicles, trucks and buses having a GVW less than 4500 k