口腔修复学精品课件（中山大学）5.烤瓷修复.pptVIP

* Step 7 Finishing Step 8 Evaluation Preparation processes * Preparation processes Posterior tooth * Step 1 Occlusal reduction Depth：1.5 ~ 2mm Preparation of functional cusp bevel Step 2 Axial reduction Step 3 Proximal reduction Watch out! Adjacent teeth! Preparation processes * Step 4 Margin preparation Buccal surface： 90°shoulder (1.0mm ) Lingual surface ：chamfer (0.5mm) Step 5 Finishing Step 6 Evaluation Preparation processes * All ceramic crown Metal-ceramic crown Incisal edge 1.5-2.0mm 1.5-2.0mm Axial surface 1.0mm 1.2-1.4mm Margin 90°shoulder (1.0mm) Labial: 90°shoulder (1.0mm) Lingual: chamfer (0.5mm) 注意事项 Notes for preparation Preparation ------ anterior tooth * Occlusal surface 1.5-2mm 1.0-1.5mm Axial surface 1.4mm Margin Buccal : 90°shoulder (1.0mm) Lingual: chamfer (0.5mm) Chamfer (0.5mm) 注意事项 Notes for preparation Preparation ------ posterior tooth Metal-ceramic crown Metal crown * Labial reduction follow 2 planes 注意事项 Notes for preparation Margin Occlusal space collar or cingulum（颈 袖） Preparation of the lingual axial wall * Conventional cast copings (传统铸造基底冠) Gold electroformed copings (金沉积基底冠) 制作类型 Fabrication * Fabrication processes 制作工艺 1. Fabrication of metal coping or metal substructure 金属基底冠的制作 2. Treating the porcelain bearing surface 基底冠瓷结合面的处理 3. Layering and sintering porcelain on the metal copping 涂瓷、烧结 4. Seating and fitting, staining, and glazing 模型试戴、染色、上釉 * Step 1 Fabrication of metal coping or metal substructure Step 2 Treating the porcelain bearing surface Final finishing