翅片导流板填料在旋转床中的流体力学模拟与精馏性能研究-化学工程专业论文 word格式.docxVIP

著。第五，对本工艺与其它两种工艺的传质性能进行了比较，其结果显示，使用翅片导流板填料的最佳转速在三者中最低，为 700-800rpm，最优 NTP 在三者中最高，为 59.4283， 最优理论等板高度在三者中最低，为 6.73mm，显示其具有良好的精馏传质性能。总之，通过对翅片导流板填料的流体力学性能模拟与精馏传质性能研究，认为翅片 导流板填料具有传质效率高、动力消耗低的特点，具有良好的应用前景。关键词：翅片导流板填料，旋转床，流体力学模拟，精馏Study of hydromechanics simulation and distillation characteristics of fin baffle packing in rotating packed bed AbstractDistillation is a kind of engineering method using reflux to separate liquid mixtures ofdifferent velocities to obtain component of high purity, which is widely applied in the fields of petroleum chemistry, food engineering, and also the most important element of chemical process industries. It also consumes 40% of the entire energy consumption of CPI. As the glooming worldwide energy crisis and demand for environmental protection. Research for higee distillation with features of high separation efficiency, low energy consumption and low room-occupation has become the worldwide hotpots of engineering technology.The status of current developments of domestic and worldwide higee distillation technology and higee distillation packings was summaried in this research. Fin baffle packings of high separation efficiency, efficient packing volume usage and improved gas-liquid contacting status is applied in distillation. Preliminary studies of hydromechanics characteristics simulation and distillation mass-transfer characteristics are carried out in the article.Hydromechanics characteristics study was carried out using Comsol Multiphysics software simulation by the method of navier-stokes model and rotating mechanical field model. A symmetrical 2D model for fin baffle packing was established. Effects of rotating speed, liquid load and gas load on liquid velocity distributions and gas pressure drop in fin baffle packing were simulated. Experimental datas of gas pressure drop were collected in the methanol/water mixtures distillation and were compared with simulated data of which the deviation range was of 14.46%-37.5%.The distillation