FTB-730仪表说明.pptVIP

推荐的脉冲宽度以及采样时间设置 测试距离 脉冲宽度 / 采样时间 1 ~1.5 km 5 ns / 30 s or 10 ns / 15 s (depends on resolution needed) 1.5 ~ 5 km 10 ns / 30 s or 30 ns / 15 s (depends on resolution needed) 5 ~10 km 10 ns / 45 s or 30 ns / 30 s (depends on resolution needed) 10 ~ 20 km 30 ns / 45 s or 100 ns / 30 s (depends on resolution 20 ~ 40 km 100 ns / 60 s or 275 ns / 45 s (depends on resolution ne 40 ~80 km 275 ns / 90 s or 1 us / 60 s (depends on resolution needed) 80 ~120 km 1 us / 90 s or 2.5 us / 60 s (depends on resolution needed) 120~ 160 km 2.5 us / 120 s or 10 us / 90 s (depends on resolution need 160 ~200 km 10 us / 120 s or 20 us / 90 s (depends on resolution needed 200~260 km 20 us / 120 s 实际操作 ? EXFO Electro-Optical Engineering Inc. All rights reserved. ? EXFO Electro-Optical Engineering Inc. All rights reserved. ? EXFO Electro-Optical Engineering Inc. All rights reserved. Be-an-Expert Training Program * Rayleigh Backscattering: These reflections are very small. They are caused by impurities that are present in every fiber. The amount of impurties are determined by the fiber manufacturer and specified as the Rayleigh Back Scattering coefficient (RBS coefficient) The RBS coefficient is normally not changed by user as most of optical fibers have almost the same RBS coefficient. When measuring special fibers with different RBS coefficient, the RBS of the fiber under test can be programmed in the OTDR software. * Fresnel Reflections: The Fresnel reflections are about 20 000 times higher compaired to Rayleigh backscattering reflections occuring into the fiber. They are represented as ??spikes?? on the OTDR trace. * Setting the