基于RC522的射频门禁控制系统毕业设计论文.doc

编 号： 审定成绩： 重庆邮电大学 毕业设计（论文）设计（论文）题目：学院： 学 生 姓 名 ： 专 业 ： 班 级 ： 学 号 ： 指 导 教 师 ： 答辩组 负责人 ： 填表时间年月 重庆邮电大学教务处制 【关键词】 ABSTRACT RFID technology is identification technology used in many filed and which developed well on the basis of the radar research . For example, a simple RFID application system including reader-writer， labels, it works similar to bar code reading and writing system but the operating principle is different, barcode recognition is based on optical technology and RFID is a radio technology. RFID technology developing quickly, especially in other country such as USA, the world’s big manufacturers Philip, MOTOROLA and so on have their RFID products because there is no unified standard, so their products each have their characteristic, sui generis. In abroad, RFID has been used spread out in the fields of business ,industrial automation produce, transportation control management, and many other fields.. Today, a development peak of RFID in China has already set out, the RFID application has been very popular. In the RFID research, the most important part is the card reader module, its function is to read information of a label through radio frequency circuit to the MCU, achieving the goal of detecting the label information. The main direction of this design is to design the card reader module and peripheral circuit design for the entrance guard system In this paper, we use the philips company ‘s MF RC522, which is base station chip, to introduce the design of general RF card read/write module: first, introduce RC 522 chip, RF card Mifare1 and STC89c52 SCM features, then introduct the composition of the system and the design method of the antenna, and then gives the hardware interface of microcontroller and the base station chip RC 522, LCD display lcd1602 , finally introduct the control part of the software’s design idea and program c