- 1、本文档共22页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
PLC电梯的控制英文文献五千字翻译(适用于本科毕业设计).ppt
* 1 The Programmable Logic Controller John R. Hackworth, Frederick D. Hackworth, Jr. Programmable Logic Controllers:Programming Methods and Applications. 2.5~2.8,The Programmable Logic Controller, John R. Hackworth, Frederick D. Hackworth, Jr. First Edition.London: Prentice Hall,2003.35~50 2.5 System Block Diagram A Programmable Controller is a specialized computer.Since it is a computer, it has all the basic component parts that any other computer has; a Central Processing Unit,Memory, Input Interfacing and Output Interfacing.A typical programmable controller block diagram is shown in Figure 2.5. Figure 2.5 Programmable Controller Block Diagram The Central Processing Unit (CPU) is the control portion of the PLC. It interprets the program commands retrieved from memory and acts on those commands.In present day PLCs this unit is a microprocessor based system.The CPU is housed in the processor module of modularized systems. Memory in the system is generally of two types; ROM and RAM.The ROM memory contains the program information that allows the CPU to interpret and act on the Ladder Logic program stored in the RAM memory.RAM memory is generally kept alive with an on-board battery so that ladder programming is not lost when the system power is removed. This battery can be a standard dry cell or rechargeable nickel-cadmium type. Newer PLC units are now available with Electrically Erasable Programmable Read Only Memory (EEPROM) which does not require a battery.Memory is also housed in the processor module in modular systems. Input units can be any of several different types depending on input signals expected as described above.The input section can accept discrete or analog signals of various voltage and current levels.Present day controllers offer discrete signal inputs of both AC and DC voltages from TTL to 250 VDC and from 5 to 250 VAC.Analog input units can accept input levels such as ±10 VDC, ±5 VDC and 4-20 ma. current loop values.Discrete input units p
文档评论(0)