机械毕业设计-立式金属带锯床结构有控制系统设计（含全套CAD图纸）.pdfVIP

I 立式金属带锯床 摘 要 立式金属带锯床分为锯床机械结构设计部分、工作台滚珠丝杠计算校核部 分、电气控制系统设计部分。（1）机械结构设计部分：采用了两个锯轮的大型锯 床结构，能够实现一般材料的加工，对轴，锯轮都的设计都一一做了验算，实现 了在保证锯床有效的工作的同时，中心部件更紧凑。（2 ）工作台滚珠丝杠计算校 核部分：滚珠丝杠是工作台的核心部件，对滚珠丝杠的计算校核大大的保证了工 作台的工作可靠度。（3 ）电气系统设计部分：由于选用的是步进电机相搭配的驱 动器，所以控制更加可靠稳定，而且还增加了针对性。驱动器上级选用三菱PLC 控制，控制更加稳定可靠，可扩展性更强。带锯床具有切割速度快、尺寸精度高、 材料损失小等特点。除此之外，金属带锯床适应性厂、动力消耗低、操作简便、 易于维护并可进行角度切割，因而获得了越来越广泛的应用。 关键词：立式锯床 自动化 PLC 滚珠丝杠 电气控制 II 立式金属带锯床 ABSTRACT Vertical metal band sawing machine for sawing machine structure design part, working table ball screw calculation part, ele ctrical control system design. (1) mechanical design part: it has adopted two saw wheel a large sawing machine structure, to achieve the general material processing, on the shaft, saw wheel design is one one done checking, achieved in that saw effective work at the same time, the center components more compact. (2) table ball screw calculation part: the ball screw is table of core components, the ball screw calculation greatly ensure the work station work reliability. (3) the electrical system design part: due to using the stepping motor which is matched with the drive, so control is more reliable and stable, but also increase the pertinence. The superior selection of Mitsubishi PLC drive control, control is more stable and reliable, expansibility of. Band sawing machine with cutting speed, high precision, low loss characteristics of materials. In addition, metal band sawing machine adaptive plant, low power consumption, simple operation, easy