autodyn培训练习Mine-Blast-on-Structure.pdfVIP

练习 Mine Blast on Structure 添加标题 Mine Blast on Structure 添加标题 Mine Blast on Structure • New model – Ident “Mineblast” – Symmetry 3D, X, Y • Materials – Load Air, Kev-Epoxy, Sand, Steel 4340 – Modify material KEV-EPOXY • Select EOS : Ortho • Change Volumetric response to Linear • Change Material Axes to IJK Space – Modify STEEL 4340 • Select EROSION: Plastic Strain, 0.2 添加标题 Mine Blast on Structure • Define Initial Conditions – Name: Hull – Select: Include material – Select: Steel 4340 – Thickness: 25 • Define Boundaries – Name: Transmit – Type: Transmit (accept all other data) – Name: Flow_out – Type: Flow_out , Preferred material: Air 添加标题 Mine Blast on Structure • Create Part • Name: Hull #1, Solver: Shell, Part Wizard – Box, XY Plane – X-orig=Yorig=Zorig=0.0 – DX=1000, DY=1000 – Cells in x = 25, Cells in y = 25 – Fill: Init.Cond., Hull • Copy Part – Select: Hull#1 – New part name: Hull#2 • Modify Part Hull#2 Zoning – Press Transformations, Rotate – Select: Y-axis, -60 – Press Transformations, Translate – Enter: DX=1000 添加标题 Mine Blast on Structure • Create Part • Name: Composite, Solver: Shell, Part Wizard • Box, XY Plane • X-orig=Y-orig= 0.0, Z-orig= 207.85 • DX=1120, DY=1000 • Cells in x = 25, Cells in y = 25 • Do not fill the Part • Fill, Composite – Define New Layup – Number of layers: 4. Name: Floor – Layer #1:: Mat: KEV-EPOXY, Dirn:0., Thk: 5 – Layer #2:: Mat: KEV-EPOXY, Dirn:90., Thk: 5 – Layer #3:: Mat: KEV-EPOXY, Dir