冲压模毕业设计推荐.docVIP

摘要 玻璃升降器外壳复合模设计以中等复杂程度的升降器外壳的冲压加工为内容，详细讨论了该零件在中批量生产条件下从毛坯到成品的冲压加工工艺过程。文中首先分析了该零件的加工工艺性，然后确定基本工序，对所有的基本工序进行可能的组合排序，将由此得到的各种工艺方案进行分析比较，从中确定出适合于生产实际的最佳方案。重点计算了冲压件主要工艺参数、模具的各种冲压力，从而选用合理的冲压设备。设计绘制了两个关键工序（落料-拉深、翻孔）的模具，其中包括模具凸、凹模、固定板等零部件的设计，模架、模柄的选用等等。在设计的最后，编写重要零部件的加工工艺和数控加工程序。 关键词：冲压工艺,模具设计,外壳 Abstract Glass composite shell mold down to design the movements of moderate complexity shell stamping process for content, a detailed discussion of the parts in batch production to the finished product from rough stamping process.The paper first analyzes the processing of the parts, and then to determine the basic processes, the basic process for all possible combinations of sorting, will thus be of a variety of technology options are compared and analyzed to determine the suitable for production from the best practice.Calculate the main focus of stamping process parameters, mold pressure range of red to use reasonable stamping equipment.Design drawing of the two key processes (Blanking - drawing, turning hole) die, including a convex mold and die, a fixed plate and other parts of the design, mold, mold, etc. choice of handle.The final design, preparation of important parts of the processing technology and CNC machining processes. Key Words: punch technics, die design, the outer shellTOC \o 1-3 \h \u 目录 HYPERLINK \l _Toc31741 第一章 绪论 PAGEREF _Toc31741 - 1 - HYPERLINK \l _Toc26456 1.1冲压的概念、特点及应用 PAGEREF _Toc26456 - 1 - HYPERLINK \l _Toc25185 1.2 冲压的基本工序及模具 PAGEREF _Toc25185 - 2 - HYPERLINK \l _Toc14055 1.3冲压技术的现状及发展方向 PAGEREF _Toc14055 - 2 - HYPERLINK \l _Toc12708 第二章 零件分析 PAGEREF _Toc12708 - 5 - HYPERLINK \l _Toc15601 2.1引言 PAGEREF _Toc15601 - 5 - HYPERLINK \l _Toc15148 2.2 零件的生产纲领及生产类型 PAGEREF _Toc15148 - 6 - HYPERLINK \l _Toc26631 2.3 零件的功用与经济性分析 PAGEREF _Toc26631 - 6 - HYPERLINK \l _Toc4864 2.4 零件的工艺性分析 PAGEREF _Toc4864 - 7 - HYPERLINK \l _Toc17636 第三章 冲压工艺方案的分析与确定 PAGEREF _Toc17636 - 8 - HYPERLINK \l _Toc126 3.1 工序性质与数量的确定 PAGEREF _Toc1