塑料罩Ⅱ注塑模具设计论文范例推荐.docVIP

PAGE 50 毕 业 设 计 题 目 塑料罩Ⅱ注塑模具设计 英文题目Injection Mold Design of the Plastic CoverⅡ 摘 要　 论文对塑件的成型工艺进行了可行性分析，介绍了该罩类零件的模具设计流程，给出了模具结构与设计要点，并对模具相关结构的重要参数以及注塑机的各项参数进行严格校核。因塑件含有侧孔，需增设侧向抽芯机构，综合多方面因素进行分析、比较，在多种可行性设计方案中选择最优设计方案，以实现产品的顺利顶出，保证产品的自动化生产。 Pro/E软件贯穿了此次注塑模具的整个三维设计过程，文中也阐明了基于Pro/E软件构建分型面的基本原理。 【关键词】注塑模具；抽芯机构；分型面 Abstract The thesis mainly introduced the mold design process of the caver-parts, given the mold structure of the injection mold and the key points in the mold design process, as well as checked all of the important parameters of the injection machine and mold related structures strictly. Due to the side-hole of the part, core-pulling mechanism agencies had to be added. Taking all kinds of factors into consideration, then selected the most reasonable program among all the available programs at last, ensured that the plastic was ejected and was manufactured automatic. Pro/E was wildly used throughout the process of 3D injection mould design, the basic principle of parting surface design based on Pro/E was also stated in the paper. 【Key words】Injection mold; core-pulling mechanism; parting surface 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc231974546 前言 PAGEREF _Toc231974546 \h 1 HYPERLINK \l _Toc231974547 第一章 概论 PAGEREF _Toc231974547 \h 2 HYPERLINK \l _Toc231974548 1.1模具在工业生产中的地位 PAGEREF _Toc231974548 \h 2 HYPERLINK \l _Toc231974549 1.2 代模具制造中的新技术 PAGEREF _Toc231974549 \h 2 HYPERLINK \l _Toc231974550 1.3 我国的模具工业的现状 PAGEREF _Toc231974550 \h 4 HYPERLINK \l _Toc231974550 1.4 我国的模具行业的发展趋势 5 HYPERLINK \l _Toc231974551 第二章 塑料罩的结构设计 PAGEREF _Toc231974551 \h 6 HYPERLINK \l _Toc231974552 2.1 设计要求 PAGEREF _Toc231974552 \h 6 HYPERLINK \l _Toc231974553 2.2 塑件成型工艺的可行性分析及修改说明 PAGEREF _Toc231974553 \h 6 HYPERLINK \l _Toc231974554 2.2.1 产品精度分析 PAGEREF _Toc231974554 \h 6 HYPERLINK \l _Toc231974555 2.2.2 脱模斜度设计 PAGEREF _Toc231974555 \h 7 HYPERLINK \l _Toc231974556 2.2.3 塑件壁厚分析 PAGEREF _Toc231974556 \h 7 HYPERLINK \l _To