徐州市南郊矿大住宅楼发泡混凝土的实验研究毕业论文推荐.docVIP

本科生毕业设计 发泡混凝土的实验研究 摘　　要 ，总高18.45m，共6层。每层层高均为3.0m。 主要内容包括建筑设计和结构设计两部分。 建筑设计总体方案设计、平面设计、立面设计、剖面设计以及屋面、楼梯及墙体等构造设计完成了建筑。 结构设计中考虑了恒载、楼屋面活载及地震水平作用、风荷载作用，荷载组合本设计框架抗震等级为级。对框架梁、柱按强剪弱弯强柱弱梁原则进行构件配筋设计，并考虑了地震区对配筋的各种构造要求。 结构设计了结构截面尺寸、荷载计算、侧移验算、内力计算、及构件设计等工作，完成了结构设计说明及标准层结构平面布置图、框架配筋图楼梯 关键词：住宅；钢筋混凝土； 框架结构； 结构设计 Abstract The graduation design is a nomal residence,named Xuzhou Nanjiao Kuangda residence,be located in Jiangsu Xuzhou .A total construction area of about ,the total height of 18.45m.Six floor on ground .A layer is 3.0m. Architectural design stage: a general programme design, graphic design, elevation design, profile design, decorative design, fire design, seismic design， roof, stairs and walls, structural design etc. And completed the explanation of architectural design and completed the architectural design and building plans note. Structural design stage: the selection of the loading system ,the framework structure layout, estimating section size, load calculation, the lateral checked, the internal force calculation, the combination of internal forces and component design etc. and completed the structural design of the standard description of the structure and structural layer of plane arrangement chart, frame reinforcement chart, board reinforcing bars chart stair, infrastructure construction of graph. Reinforced concrete structure system is generally framework structure, shear wall structure system, the giant structure. Frame structure system’s component included vertical columns and horizontal beam ,it is formed by connecting nodes, and bear both of the vertical loads and the horizontal loads fome the structure. According to the characteristics of framework structure,the construction of superstructure using the framework of cast-in-place reinforced concrete structure, the lower part of a separate basis. Consider the structural design of the dead load and live load of floor,and roof ,and the level of the earthquake, wind loads, load effect combinations, etc .The se