多分散结构团聚体烧结的数值模拟-中国电机工程学报.PDF

第32 卷 第8 期 中 国 电 机 工 程 学 报 Vol.32 No.8 Mar.15, 2012 58 2012 年3 月15 日 Proceedings of the CSEE ©2012 Chin.Soc.for Elec.Eng. 0258-8013 (2012) 08-0058-06 TK 121 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 多分散结构团聚体烧结的数值模拟 赵海波，郑楚光 (煤燃烧国家重点实验室(华中科技大学) ，湖北省 武汉市 430074) Numerical Simulation for Sintering of Agglomerates Consisting of Polydisperse Primary Particles ZHAO Haibo, ZHENG Chuguang (State Key Laboratory of Coal Combustion (Huazhong University of Science and Technology), Wuhan 430074, Hubei Province, China) ABSTRACT: The sintering of agglomerates under high 团聚体内一次粒子多分散分布的模型结果比考虑团聚体内 temperature determines their surface area and internal 一次粒子单分散分布的模型结果更精确。所建立的描述团聚 inhomogeneous structure. These available models for 体烧结过程的多分散模型可适用于多尺度模拟、颗粒群平衡 numerical simulation of sintering phenomenon generally 模拟–Monte Carlo 方法、多相流模拟的欧拉–拉氏模型等。 assume that agglomerate consists of equally-sized primary 关键词：结构重建；球形化；纳米颗粒；颗粒群平衡模拟； particles (PP), which conflicts with experimental measurements. 气溶胶反应器 In this paper, it was considered primary particles within agglomerates satisfy polydisperse distribution. The population 0 引言 balance equations for the mass and number of primary particles were constructed to obtain the evolution of size distribution of 无论是燃烧过程产生的各种有害细微颗粒物 primary particles within agglomerates. The polydisperse PP (可吸入颗粒物、碳黑等)[1-4]，还是通过高温环境(通 model was then used to simulate the sintering process that was 过燃烧、