轻型门式钢架毕业设计计算书推荐.docVIP

内蒙古科技大学 本科生毕业设计说明书 题 目：包头精工钢结构公司厂房建筑结构设计 学生姓名：卞 江 学 号：0863104516 专 业：土木工程 班 级：土木2008-5班 指导教师：曹芙波 副教授 摘 要 毕业设计题目是：包头精工钢结构公司厂房建筑结构设计。设计主要完成建筑设计和结构设计两部分内容，建筑设计主要完成厂房平面、立面、剖面设计，结构设计从构件选型到截面、节点连接验算，包括对工程图纸的具体要求及参数设计，达到施工图设计水平。 本设计根据各项设计规范、设计原始资料完成。轻型钢结构单层装备车间厂房，其中有一台10吨A5级工作制吊车，24米跨度双坡轻型门式刚架，7.5米柱距。总建筑面积1440㎡。刚架柱下设有混凝土独立基础。 整个设计使用国内外先进的设计方法，正确的设计思路，严谨的设计态度。通过对众多参考资料进行比较和校正，选择经济合理的方案，历时3个多月的反复验算，完成整个设计。 关键词：建筑结构；建筑设计；结构计算；门式刚架；荷载 Abstract The graduation design topic is the project of Steel Structure Company of JingGong in Baotou Rare Earth Development Zone. The designation focuses mainly on two parts, namely the architectural design and structural design. The architectural design is mainly composed by the plane, elevation, and profile design of the factory building. The structural design includes component selection, checking computations of cross-sections and joint connection. It also consists of specific requirements of engineering drawings and designing parameters achieved the level of drawing. This design according to various designing specifications, source material, and the requirements from the party. light steel structure of single layer and equipment, which has a 10 tons class A5 service crane. 24-meter span double slope steel frame, 7.5 meters column distance. The total construction area 1440 square meters . There are independent foundation of concrete under the frame columns. We do the design with advanced design methods, the correct design ideas, and robust design approach. Through comparing and rectifying a number of references and three months of repeating calculation, this design is formally finished. Key words: Building structure; architectural design; structure calculation; steel; portal steel frame; load 目 录 摘 要 TOC \o 1-3 \h \u HYPERLINK \l _Toc4611 Abstract HYPERLINK \l _Toc16669 第一部分 结构选型和结构布置 HYPERLINK \l _Toc30301 第一章 设计原始数据 PAGEREF _Toc30301 1 HYPERLINK \l _Toc30880 1.1 工程概况 PA