Introduction to Solid State Lighting II 固体照明导论精选.ppt

Cross-section of a LED fiber light engine * LED application * * SOME of LED WEB SITES /people/don/led.html /index.html / / / / /laser.htm * Conclusion “... it is vital to know that the LED is an ultimate form of lamp, in principle and in practice, and that its development indeed can and will continue until all power levels and colors are realized.” * References 1. Arturas Zukauskas, Michael S Shur, Remis Gaska, Introduction to Solid-State Lighting, 2002, John Wiley Sons Inc. 2. Schubert E. Fred, Light-emitting Diodes, Cambridge University Press. * Thanks * Optimal boundaries of the phase distribution for 4870?K white-light sources containing 2, 3, 4, and 5 primary sources with the 30?nm line widths. Crosses mark the points that are suggested for highest reasonable CRI for each number of the primary sources * InGaN based luminescence conversion white LED S.Nakamura and G.Fasol, The Blue Laser Diode: GaN Based Light Emitters and Lasers,Springer, Berlin, 1997 * InGaN based phosphor-converted white LED Losses with Stokes shift * Energy levels of Ce3+ (4f1) in yttrium aluminum garnet Y3Al5O12 * White light from blue emission of AlInGaN LED (465?nm) and yellow emission of cerium-doped garnet with different peak wavelength positions * by blue AlInGaN LED and yellow cerium-doped garnet with different peak wavelength positions * Model emission spectra of AlInGaN/(Y1-aGda)3(Al1?bGab)5O12:Ce3+ white LEDs for two compositions of garnet. Solid line, peak wavelength of phosphor emission is at 570?nm; dashed line, for 580?nm * Model white emission spectrum from AlInGaN/(SrGa2S4:Eu2++SrS:Eu2+) system * Model white emission spectrum from trichromatic PC?LED with UV pump and three phosphors * one chip white LED with two active layers * One chip white LED with recycling of photons * Multi-chip LED: 2 chip LEDs * Optimized spectral power distributions 5 LEDs 4 LEDs 3 LEDs 2 LEDs * Variation of the peak wavelength with general CRI for solid-state lamps composed of 2, 3, 4, and 5