华夏大学综合配电系统设计(论文).docVIP

华夏大学综合配电系统设计 院 系： 机电与自动化 专 业 班： 姓 名： 学 号： 指导教师： 2013年6月 华夏大学综合配电系统设计 Design of power distribution system of Huaxia University  摘要 毕业设计是学生走出校门、走向社会相关工作岗位的一道考核，也是一次对学生四年所学知识的巩固程度的大考验。 本次设计要求根据大学校园的布局及各种建筑的分布，设计整个校园的配电系统，便于学校后勤部门管理，并且尽可能的优化配电资源，降低成本。设计中包括各种变压器、各种继电开关、线路和相关部分的布线以及应急电源等的选择和布置。 在分析给定的资料的基础上，根据所取得电源情况，电负荷数据，气象资料等，以实现安全、可靠、优质、经济的供电系统为设计目标，共完成了: 确定变电所主变压器的台数与容量,类型, 选择变电所主结线方案及高低压设备和进出线, 确定二次回路方案以及选择整定继电保护装置等. 通过完成这次设计，巩固和加深了对三年来所学有关专业知识的理解，获得了实践经验，从而为以后完成相关的设计打下良好的基础，同时也使自己该方面的学习成果得到综合考核。 关键词：配电系统 变电所 短路 变压器 功率 Abstract The graduation design is an assessment that students get out of school to work in social. It is also a major test for knowledge that student acquire in four years learning. The design requires that on the basis of layout and distribution of various types of construction in University campus, to design the distribution system for the entire campus, to facilitate school logistics sector‘s management. And as much as possible to optimize the resources of distribution, reduce costs. The design includes the selection and arrangement of the various transformers, relay switch, line, the wiring of relevant parts and emergency power supply, etc. Gained power situation, electricity load data, meteorological data, on the basis of analysis of the information given to achieve a safe, reliable, high-quality, economical power supply system design goal. Completing a total of determining the number, capacity and type of the transformer, selecting the main junction line programs ,the high and low voltage equipment ,the inlet and outlet wire, determining the secondary circuit program and select the relay protection devices. I consolidated and deepen the understanding of the relevant professional knowledge learned in the three years, obtained practical experience during the design. So as to lay a good foundation for the future to complete the related designs, as well as have a comprehensive a