一种可重构的冲压模具和冲压工艺外文翻译.docVIP

一种可重构的冲压模具和冲压工艺外文翻译 J. Shanghai Jiaotong Univ. (Sci.), 2010, 15(3): 313-318 DOI: 10.1007/s12204-010-1009-z A Recon?gurable Stamping Die and Its Stamping Process ***SONG Ai-ping?(宋爱平), WU Wei-wei (吴伟伟), ZHANG Jun (张 军) (College of Mechanical Engineering, Yangzhou University, Yangzhou 225009, Jiangsu, China) ? Shanghai Jiaotong University and Springer-Verlag Berlin Heidelberg 2010 *Abstract: A recon?gurable ?exible poles die was developed. The die can be used to implement the process of “the multi-point pressing and forming sheet”. Sheet metal is restricted by the elastic pressing forces putting on the upper and lower surfaces of sheet in stamping process. The method is an e?ective way to enhance the buckling critical stresses and reduce wrinkling of sheet. The results of tests indicate that the die can achieve “one die brings multi-purpose” and suppress the wrinkle of sheet. The process of the multi-point pressing and forming sheet provides a practical and e?ective way for the curved sheet metal forming. Key words: stamping process, wrinkle, recon?gurable, die **CLC number: TG 386 Document code: A 1 Introduction Wrinkling of sheet metal seriously in?uences the forming quality and the life of die. It may make the forming process unable to carry on. So e?ectively sup- pressing wrinkle seems to be highly important[1]. In recent years, in order to meet the demand of light and tough sheet metal, thin sheet metal parts are widely ap- plied in various ?elds. The study of Wrinkling becomes series of regular and adjustable the basic bodies (poles) to construct the structure of a die. Thus, the recon- struction of die can be achieved, but the wrinkling in the sheet metal has not been suppressed[5]. The paper emphasizes how to control wrinkle of sheet one of the hottest research topics[2]. Since the near century, many scholars have brought massive studies and discussions into the instability of sheet. These researches cov