插座零件塑料注塑模具设计论文.doc

插座零件塑料注塑模具设计 作者姓名：XXX 专业名称：机械工程及自动化 指导教师：XX 副教授 XX 助教 摘要 随着我国工业技术的发展，模具行业在我国产品生产中占据重要的一席，其中约95%的塑料制品依靠模具生产，注塑制品占所有塑料制品的30%左右，注射模具的产量占世界塑料成型模具总量的一半以上。塑料工业是当今世界上增长最快的工业门类之一。模具是利用其特定形状去成型具有一定形状和尺寸的制品的工艺装备或工具，它属于型腔模的范畴。按制品所采用的原料不同，成型方法也不同，一般将模具分为塑料模具，金属冲压模具，金属压铸模具，橡胶模具，玻璃模具等。 该论文分析了我国塑料模具行业并阐述了该行业的现状及趋势，讲述了从插座零件的选材到模具设计一系列的理论知识，其主要目的在于阐述及论证注塑模具的正确设计步骤及方法。在文中分析了塑件的工艺性能，确定了注塑机的类型及选用方法，并对模具设计中一系列重要数据进行了计算。重点进行了模具的结构设计，对模具的浇注系统、冷却系统、脱模系统等等进行了详细的设计。本模具设计机构相对合理，并且能满足塑件的工艺要求。 关键词 ：注塑模 分型面 浇注系统 pc料 Abstract With the development of our country industry, mould industry in our country?production?occupies an important one seat, and the?plastic products?about 95%?rely on the mold production, injection molding?products accounted for?about 30% of?all plastic products. Injection mold?production accounts for more than?half of the world?total?of plastic molding die. Plastic industry is one?of the fastest?growth in todays world. Mould is a?process equipment?or?tool products?to the shape of a?certain shape and size?by using the special shape,?and it belongs to?the category of?cavity?mould. Used by the products?of different raw materials,?the molding methods are different,?generally?divided into?the?mold plastic mold,?metal?stamping die,?metal die-casting mold, rubber mold,?glass mold?etc.. This?paper?analyzes?the plastic mold industry in China and expounds the?present situation and the?trend in the industry, told from?a series of theoretical knowledge of?material to mold design?socket?parts. Its main purpose is to?explain?and?demonstrate?the correct design steps of?injection mold?and method. In the paper,?plastic parts of the process performance,?determine the?type?and selection?method of injection machine,?and the die?design of a series of?important data. And focus on?the structural design of mold,?the?mold?gating system,?cooling system,?release?system and so on?in detail design. The?die design?institution?is relatively reasonable,?and can meet the requirements of?process of