官方说明书ANALOG DEVICES Interfacing AD7865 Parallel ADCs to ADSP-21161 SHARC Processors 说明书.pdfVIP

/file/2700923 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2700923 Engineer-to-Engineer Note EE-259 Technical notes on using Analog Devices DSPs, processors and development tools a Contact our technical support at dsp.support@ and at dsptools.support@ Or visit our on-line resources /ee-notes and /processors Interfacing AD7865 Parallel ADCs to ADSP-21161 SHARC® Processors Contributed by Aseem Vasudev Prabhugaonkar and Jagadeesh Rayala Rev 1 – December 17, 2004 Introduction AD7865 Product Highlights This application note explains how to interface The AD7865 features four track/hold parallel ADCs to ADSP-21161 SHARC® amplifiers and a fast (2.4 µs) ADC, allowing processors. The parallel ADC considered in this simultaneous sampling and then conversion application note is AD7865. This application of any subset of the four channels. note also provides example code to demonstrate The AD7865 operates from a single 5 V how the SHARC processor’s external port can be supply and consumes only 115 mW (typical), programmed to receive data from the AD7865 in