官方说明书MAXIM MAX9981 数据手册.pdfVIP

19-2588; Rev 0; 9/02 825MHz to 915MHz, Dual SiGe High-Linearity Active Mixer General Description Features M The MAX9981 dual high-linearity mixer integrates a local +27.3dBm Input IP3 A X oscillator (LO) switch, LO buffer, LO splitter, and two +13.6dBm Input 1dB Compression Point active mixers. On-chip baluns allow for single-ended RF and LO inputs. The active mixers eliminate the need for 825MHz to 915MHz RF Frequency Range 9 an additional IF amplifier because the mixer provides a 70MHz to 170MHz IF Frequency Range 9 typical overall conversion gain of 2.1dB. 725MHz to 1085MHz LO Frequency Range 8 The MAX9981 active mixers are optimized to meet the 2.1dB Conversion Gain 1 demanding requirements of GSM850, GSM900, and CDMA850 base-station receivers. These mixers provide 10.8dB Noise Figure exceptional linearity with an input IP3 of greater than 42dB Channel-to-Channel Isolation +27dBm. The integrated LO driver allows for a wide -5dBm to +5dBm LO Drive range of LO drive levels from -5dBm to +5dBm. In addi- tion, the built-in high-isolation switch enables rapid LO +5V Single-Supply Operation selection of less than 250ns, as needed for GSM trans- Built-In LO Switch with 52dB LO1 to LO2 Isolat