samcef 转子动力学-12.pdf

SAMCEF for ROTORS Chapter 3.7: Harmonic response This document is the property of SAMTECH S.A. MEF 101-03-7-A, Page 1 Table of contents Chapter 3.7: Harmonic response Introduction Algorithms Storage  Running the analysis  Files  Listing  Results This document is the property of SAMTECH S.A. MEF 101-03-7-A, Page 2 Introduction Chapter 3.7: Harmonic response I. Introduction The purpose of this analysis is the computation of the harmonic response of a structure with rotating isotropic parts II. Algorithms III. Storage The following equation is solved in a non rotating frame: IV. Running the analysis V. Files VI. Listing VII. Results Where, • K is the generalized stiffness matrix with the contribution of the structural stiffness, stiffness of the joints, circulatory forces • M the mass matrix • B(Ω) is the generalized damping matrix with the contribution of the structural damping, the damping of the joints and the gyroscopic effect • H is the hysteretical damping matrix • q the displacement vectors • Ω is the rotation speed [rad/sec] of the reference rotor. When several rotors are present in the model, the gyroscopic matrices and the circulatory forces matrices are multiplied by a proportionality factor.