官方说明书intersil X9252 数据手册.pdfVIP

X9252 ® Low Power + Quad 256-tap + 2-Wire Bus + Up/Down Interface Data Sheet November 14, 2005 FN8167.2 Quad Digitally-Controlled (XDCP™) Features Potentiometer • Quad Solid State Potentiometer The X9252 integrates 4 digitally controlled potentiometers • 256 Wiper Tap Points-0.4% Resolution (XDCP) on a monolithic CMOS integrated circuit. • 2-Wire Serial Interface for Write, Read, and Transfer The digitally controlled potentiometers are implemented Operations of the Potentiometer using 255 resistive elements in a series array. Between each pair of elements are tap points connected to wiper terminals • Up/Down Interface for Individual Potentiometers through switches. The position of each wiper on the array is • Wiper Resistance: 40Ω Typical controlled by the user through the Up/Down (U/D) or 2-wire • Non-Volatile Storage of Wiper Positions bus interface. The wiper of each potentiometer has an associated volatile Wiper Counter Register (WCR) and four • Power On Recall. Loads Saved Wiper Position on Power- non-volatile Data Registers (DRs) that can be directly written Up. to and read by the user. The contents of the WCR controls • Standby Current 100µA Max the position