官方说明书ROHM Near edge thermal printhead 说明书.pdfVIP

ROHM Near edge thermal printhead Manual /file/2616572 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2616572 Printheads Near edge thermal printhead A thermal printhead is sometimes required to print on a flat plane without bending the print medium. For this re- quirement, other companies offer various types of ther- mal printheads including end face thermal printhead. ROHM offers a near edge thermal printheads for this re- quirement. Our near edge thermal printhead, as shown in Fig. 3, in- corporates a heating element at the end of the heating element circuit board and utilizes the curvature of its glazed structure to enable the straight passing of the printing medium. Conventional types (perfect end face and corner types) place heating elements vertical or in- clined to the normal electrode plane (driver IC mounting surface). This required a production process that is usu- ally costly and not productive. However, our near edge thermal printhead is productive, because it is produced using a production method almost the same as flat ther- mal printheads. 1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the produ