官方说明书ROHM Operation notes 说明书.pdfVIP

ROHM Operation notes Manual /file/2616575 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2616575 Printheads Operation notes A thermal printhead can be used for a very long time if it 2) Do not allow a potential difference to develop is used properly. Take care of the following in operating between the COM power supply and VDD a thermal printhead. (power supply for a driver IC). 3) Supply a protective circuit so that overcurrent is not applied to the power supply line. (1) A thermal printhead may be burnt in a very short (9) Take antistatic measures to protect heating ele- time when the temperature goes up abnormally be- ments and driver ICs from static damage. Do not cause of overload (including printing without print- touch electrodes such as pins of connectors with ing medium under normal load). Use a printhead your hands. Take special care when using heat sen- below the maximum rating so that overload may not sitive paper or transfer ribbon that tend to generate happen for a very short time. static electricity. (2) Do not apply abnormally high surge voltage to an (10) Put the COM voltage of a thermal printhead in the energized pulse even for a very short time. Gener- OFF state when printing is finished. ally a thermal printhead does switching o