快速安装指南（中英文版）.docVIP

H.264 NETWORK Embeded DVR USER MANUAL （English/ ChineseGB） security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image and low error coding ratio. Strong network services greatly enhance the network data transmission capacity and remote control capabilities. The First Part: Basic Operation 1 Basic Installation 1.1 Hard Disk Installation For the first use，please install the hard disk. E series DVR support 2 hard disks, and B series DVR support 1 hard disk. Note: DVR can run and monitor normally without hard disk, while it can’t record and playback. 1.2 Mouse Connection There are 2 USB ports at the back panel of DVR, the upper USB port is specially used in mouse connection, and the other one is connected with storage equipment for high-speed download. Note: These two ports should not be changed, if the upper ports is connected with storage equipment, the storage speed will be quite slow; and if the below one is connected with USB which will lead to abnormal mouse operation. Special model only support 1 USB port 2 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After finishing the startup you will hear a beep, and the default setting of video output is multiple-window output mode. Note: Restart the power after the abnormal power off, DVR will automatically recover the state before power off. 3 Turn off There are two methods to turn off the DVR which are soft switch and hard switch. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch. Note: The setting information must be saved before replacing the battery otherwise information will lose. 4 Login When th