智能窗帘系统设计项目论文汇.docx

本科CDIO一级项目论文论文题目智能电动窗帘设计学生姓名学号专业班级指导教师职称讲师二O 一一年十一月成都信息工程控制工程学院制智能窗帘系统设计摘要本文描述了智能遥控窗帘系统的设计和工作原理，给出了智能遥控窗帘系统的硬件原理图、软件流程图。用单片机实现窗帘控制，为传统的手拉式或滑轮式窗帘应用模式转轨到新的红外模式和光敏电阻模式以及按键模式提供了具体解决方案，也为窗帘的智能化发展提供了新的思路。本文的主要研究工作如下：使用用价格相对便宜的红外线遥控发射芯片、和光敏电阻模块和按键开关来实现对智能窗帘的半自动和全自动的控制；使用技术成熟的单片机最小系统作为主要控制系统，因为它是一个软硬件相结合的系统，软件是控制单片机控制的程序源代码；硬件是实现系统控制功能的电子元件、单元电路的组成；使用由四个MOS管连接H桥式电机驱动电路作为驱动模块实现对直流电机的驱动。由于时间和技术上的限制，未来还需要针对智能窗帘各个模块的参数进行调优，通过与实际问题相结合的设计得到更好的结果。关键词：智能家居系统；自动窗帘系统；红外线遥控；光敏电阻模块；H桥式电机驱动电路；单片机最小系统Intelligent curtain system designAbstractThis paper describes the intelligent remote control curtain system design and working principle, presents the intelligent remote control curtain system hardware diagram, the software flow chart. With MCU curtains control, for the traditional type or pulley type curtain application mode transition to the new infrared pattern and photosensitive resistance mode and key model provides specific solutions, as well as the curtain intelligent development provides a new train of thought.The main research work is as follows:The use of the relatively cheap price of the infrared remote control transmitting chip, and photosensitive resistance module and a key switch to achieve the intelligent curtain semi-automatic and fully automatic control;The use of mature technology of SCM system as the main control system, because it is a combination of software and hardware system, software control microcontroller control program source code; hardware system is to realize the control function of the electronic element, circuit unit;Use is made of four MOS tube connecting the H bridge motor drive circuit for driving module for DC motor drive.Because of the time and technical limitations, future need for intelligent curtain modules of the tuning parameters of the actual problem, and by combining the design to get better results.Key words: intelligent home furnishing system; automatic curtain system; infrared remote control; the photosensitive resistor module; H bridge motor