毕业设计（论文）-1吨三轮叉车普通式起重装置设计汇.docVIP

各专业完整优秀毕业论文设计图纸 三江学院 Abstract With the development of the national economy, the application of industrial vehicles are becoming widely forklift belongs to the universal lifting the transport machinery, is one of the most important tools, material handling, plays an important role in the logistics system of all walks of life, is widely used in the station! Port. Airport. Factory! Warehouse forklift truck as a new type of vehicle, are analyzed and compared in this paper shows its own characteristics through the development of domestic and foreign electric forklift, discussed 1 tons of three wheels is common type system development feasibility study, and analysis of structural characteristics of three forklift! The paper outline master plan for the 1 tons of three common forklift, forklift trucks to carry on the design, based on the given technical parameters and operating conditions, determine the type, the structure type, size range, the overall layout; the technical performance of calculation or estimation, provide the basis for technology or limit the design of each part, the each part is combined into the whole forklift. First determine the structural types of different components, estimation of main dimensions and layout and the weight and center of gravity, determine the weight center of gravity and vehicle. And then by determining the mobility parameters calculation, design of working device by CAXA fork, carriage. Through the calculation to determine the working device of the stiffness, strength! Lift cylinder finally design. Keywords: Three wheels； The lifting device； CAXA；目 录 第1章 绪论 1 1.1 研究三轮叉车普通式起重系统的意义 1 1.2 国内外叉车起重系统的研究概况 1 1.3 本课题研究解决的问题 2 1.3.1 起重装置方案的确定 2 第2章 总体方案设计 3 2.1 电动叉车型号及各项技术要求 3 2.1.1 叉车型号：CPDS—1.0 3 2.1.2 技术参数如表2--1所示 3 2.1.3 构造型式及工作条件 3 2.2 总体方案 4 2.2.1 确定各构件的构造型式，主要尺寸及布置位置 4 2.2.2各部分重量和重心的估算，整车自重及重心的确定 4 2.2.3 稳定性计算 6 2.2.4 轮胎选择 11 2.2.5 牵引计算 12 2.2.6 制动性能计算 15 2.2.7 机动性参数确定 16 第3章 工作装置 17 3.1 工作装置简介 17 3.1.1 货叉 18 3.1.2 滑架 18