毕业设计（论文）-高速永磁电机转子动态响应特性研究汇.docVIP

摘 要 本课题是辽宁省教育厅项目《高速永磁电机转子动态响应特性研究 》的研究内容。高速电机的体积小、功率密度大和效率高，正成为领域的研究热点The research work of this thesis is the project-“the property of movable answer of high speed PM machine rotor”, which is supported by the education office of Liaoning province. The high speed generator, due to its small volume, high efficiency and great power density, is one of the great concerns in electrical engineering. The development of high speed generator is regarded important research and development project, but compare to America and European countries, the popularization and application of high speed generator has a large disparity in our country. In this paper，it mainly researches magnetic bearing rotor system dynamic evidence for the structural problem. It offers a theoretic evidence for the structural of design parameter. Firstly, the structure design and strength analysis of the PM rotor are carried out in this paper. A new type of rotor, which is made of an integral PM enclosed in a nonmagnetic high strength alloy, is brought forward for that the PM could bear little tensile stress but great pressure. To insure the PM rotor’s safety, the interference fit between the PM and the enclosure must be carefully chosen for the pre-pressure must be greater than the centrifugal force so that the PM could still bear some pressure when the rotor is running at the rated speed. Based on the finite element method, the stress model is built up, the interference value is determined and the stress distribution is calculated. Secondly, discuss the method of building bearing-rotor system mechanics model and calculation of bearing-rotor system mechanics. Analyze electromagnetic field and support characteristic of magnetic bearing. Educe the optimal support stiffness computational formula. Do the dynamic calculation and analysis of high speed rotor system with the finite element analysis. Gain the system critical rotational speeds and th